⚡ IT Wisdom
Why does everyone trust atoms? Because they make up everything. Why doesn't anyone trust sysadmins? Same reason.
Skilled Practitioner
4249 XP
1751 to Expert
Manage Cards
Add manual cards or delete existing ones
All Cards
76 cards total
EPT1
Field Testing
12 cards
·
12 basic
· 0 cloze
Basic
12 cards
| What are the three terminals of a megohmmeter and what does each connect to? | claude | |
| Why must a multimeter be connected in series to measure current, but in parallel to measure voltage? | claude | |
| In a 4-terminal Kelvin connection on a DLRO, where must the potential (P1/P2) contacts be placed... | claude | |
| What is the correct physical sequence for a live-dead-live verification with a voltage detector? | claude | |
| What must physically happen to a test object's terminals immediately after a hipot test and... | claude | |
| Which transformer winding do the H leads and X leads connect to on a TTR test set, and what does... | claude | |
| How does a relay test set physically detect relay trip timing, and why must its monitoring leads... | claude | |
| In the fall-of-potential method, where is the potential stake placed, and what does the... | claude | |
| How does a disk-type phase rotation meter physically indicate phase sequence, and what must be... | claude | |
| How are a capacitance meter's leads physically connected, and what must be done to a capacitor... | claude | |
| What standard governs calibration of field test instruments, and what minimum Test Uncertainty... | claude | |
| Per ASTM F496, what are the maximum retest intervals for rubber insulating gloves vs. sleeves,... | claude |
Management and Planning
8 cards
·
8 basic
· 0 cloze
Basic
8 cards
| What are the four electrical quantities specified in the NICET Management and Planning content... | claude | |
| What does the prefix 'kilo' (k) mean, and give an electrical example? | claude | |
| What does the prefix 'mega' (M) mean, and give an electrical example? | claude | |
| What does the prefix 'milli' (m) mean, and give an electrical example? | claude | |
| What does the prefix 'micro' (μ) mean, and give an electrical example? | claude | |
| State Ohm's Law and the three derived formulas. | claude | |
| What does the NICET Code of Ethics require when a Level I technician's supervisor directs them... | claude | |
| What is the difference between a primary injection test and a secondary injection test? | claude |
Safety
56 cards
·
56 basic
· 0 cloze
Basic
56 cards
| What are the five fire classes (A/B/C/D/K) and what material does each cover? | claude | |
| Which extinguisher agents work on which fire classes? | claude | |
| What is the PASS technique for using a portable fire extinguisher? | claude | |
| Per OSHA 1910.157, what are the maximum travel distances to extinguishers for Class A and Class... | claude | |
| How often must a portable fire extinguisher be formally inspected, and what does the monthly... | claude | |
| Why is CO2 dangerous in a confined space, and why is it the preferred agent for energized electronics? | claude | |
| Under what conditions should you NOT attempt to fight a fire with a portable extinguisher? | claude | |
| Why must you confirm the extinguisher's class label before use, and what happens if you use the... | claude | |
| What federal agencies establish safety vs. environmental regulations relevant to an EPT1... | claude | |
| What are the four ANSI Z535.4 signal words, their header colors, and what each means? | claude | |
| What does NFPA 70E cover, and how does it relate to OSHA 29 CFR 1910.331-335? | claude | |
| What are the four quadrants of the NFPA 704 hazard diamond and what does each color represent? | claude | |
| What information must appear on an arc flash placard per NFPA 70E, and which SDS section tells... | claude | |
| What are the 16 GHS SDS sections, and which sections are most immediately actionable during an emergency? | claude | |
| Under OSHA 1910.1200 HazCom, when must SDS be accessible, and what must you do with an unlabeled... | claude | |
| What does OSHA 29 CFR 1910.145 cover, and what is the key restriction on accident prevention tags? | claude | |
| AHA adult CPR: compression rate, depth, and ratio? | claude | |
| AHA two-rescuer child CPR ratio vs. one-rescuer child — and infant CPR depth? | claude | |
| AED: minimum pad clearance from an implanted pacemaker/ICD? | claude | |
| Red Cross: chemical eye flush duration? Why not neutralize? | claude | |
| Red Cross: burn cooling duration, and what is prohibited? | claude | |
| Red Cross: tourniquet placement distance? Shock leg elevation? | claude | |
| Red Cross heat stroke threshold and choking sequence? | claude | |
| AHA: breathing check time limit? Unwitnessed child collapse — CPR first or call 911 first? | claude | |
| What are the three hard hat classes and their voltage ratings? (ANSI Z89.1 via OSHA 1910.135) | claude | |
| What are the maximum use voltages for rubber insulating glove Classes 00 through 2? (OSHA... | claude | |
| What are the maximum use voltages for rubber insulating glove Classes 3 and 4? (OSHA 1910.137 Table I-1) | claude | |
| What are the in-service maintenance requirements for rubber insulating gloves under ASTM F496? | claude | |
| What are OSHA's noise exposure limits and hearing conservation thresholds? (OSHA 1910.95 / 1926.101) | claude | |
| What is the OSHA noise dose formula and when is a combined shift exposure a violation? | claude | |
| What are the four NFPA 70E arc flash PPE categories and their minimum arc ratings? | claude | |
| What are the retirement rules for body harnesses and hard hats? | claude | |
| What are the ANSI/ASC A14 duty ratings for ladder types III, II, I, IA, and IAA? | claude | |
| What are the OSHA 1926.1053 requirements for portable ladder rung spacing and side-rail... | claude | |
| What is the OSHA 1926.1053 pitch rule for non-self-supporting portable ladders? | claude | |
| What safety factor does OSHA 1926.1053 require for portable ladders, and is there an exception? | claude | |
| What does OSHA 1910.27 require for fixed ladders that extend 20 feet or more above a lower level? | claude | |
| What are the OSHA 1926.451 scaffold requirements for load capacity, fall protection, and inspection? | claude | |
| What are the key OSHA 1926 Subpart M thresholds for personal fall arrest systems? | claude | |
| What are the ANSI/ASC A14 maximum lengths for portable single and extension ladders? | claude | |
| What are the three criteria that define a "confined space" under OSHA 1910.146? | claude | |
| What four characteristics make a confined space "permit-required" under OSHA 1910.146? | claude | |
| What are the atmospheric hazard thresholds for oxygen deficiency, oxygen enrichment, and... | claude | |
| What are the three personnel roles under OSHA 1910.146 confined space entry, and what does each... | claude | |
| Under OSHA 1910.146, what must an attendant do if conditions inside the permit space become... | claude | |
| What key items must an OSHA 1910.146 entry permit include? | claude | |
| Under OSHA 1910.146, what is required to reclassify a permit-required confined space as a... | claude | |
| Under OSHA 1910.146, what is the required retrieval system configuration for permit-required... | claude | |
| What are the six steps of the LOTO procedure under OSHA 1910.147(d) — in order? | claude | |
| Under OSHA 1910.147, when may tagout only be used instead of lockout? | claude | |
| Under OSHA 1910.147, who may remove a lockout or tagout device? | claude | |
| Under OSHA 1910.147, how often must energy control procedures be inspected, and who performs the... | claude | |
| Name the seven types of hazardous energy controlled by OSHA 1910.147 LOTO procedures. | claude | |
| Under OSHA 1910.147, what is the difference between a lockout device and a tagout device? | claude | |
| Under OSHA 1910.147, what must happen before energy is restored after maintenance... | claude | |
| Under OSHA 1910.147, what four items must the annual LOTO inspection certification include? | claude |
Add Card